AMD Graphics xorg.conf

Created by: Lester Caine, Last modification: 19 Oct 2015 (00:35 BST)

Creation of the xong.conf file was a little hit and miss. The installer did not seem to create an empty one to build on, so manual intervention was required to create a starting point. The YAST Monitor tool would not initially run, but after finding amdcccle and getting a clean configuration there, the YAST module started to work properly.

The next step is to work out if it is possible to disable the reliance on DDC2 since these are not passed through my KVM system.

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "ServerFlags"
	Option	    "Xinerama" "off"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-1"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-2"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-3"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Monitor"
	Identifier   "0-DFP1"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1920x1200"
	Option	    "TargetRefresh" "60"
	Option	    "Position" "0 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Monitor"
	Identifier   "0-DFP5"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1920x1200"
	Option	    "TargetRefresh" "60"
	Option	    "Position" "1920 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Monitor"
	Identifier   "0-DFP7"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1920x1200"
	Option	    "TargetRefresh" "60"
	Option	    "Position" "5760 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Monitor"
	Identifier   "0-CRT1"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	Option	    "PreferredMode" "1920x1080"
	Option	    "TargetRefresh" "60"
	Option	    "Position" "3840 0"
	Option	    "Rotate" "normal"
	Option	    "Disable" "false"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	Option	    "Monitor-DFP1" "0-DFP1"
	Option	    "Monitor-DFP5" "0-DFP5"
	Option	    "Monitor-DFP7" "0-DFP7"
	Option	    "Monitor-CRT1" "0-CRT1"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-1"
	Driver      "fglrx"
	Option	    "Monitor-CRT1" "0-CRT1"
	BusID       "PCI:1:0:0"
	Screen      1
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-2"
	Driver      "fglrx"
	Option	    "Monitor-DFP5" "0-DFP5"
	BusID       "PCI:1:0:0"
	Screen      2
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-3"
	Driver      "fglrx"
	Option	    "Monitor-DFP7" "0-DFP7"
	BusID       "PCI:1:0:0"
	Screen      3
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Virtual   7680 1920
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-1"
	Device     "aticonfig-Device[0]-1"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-2"
	Device     "aticonfig-Device[0]-2"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-3"
	Device     "aticonfig-Device[0]-3"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection